Connecting To The Telephone Line; Connecting The Power And Switching On - Ricoh Fax 2100L Operating Instructions Manual

Connecting to
the Tele-
phone Line
There are two similar sockets located at the rear
of the machine:
TEL1: For the optional handset or external telephone
LINE: For connecting to the telephone line
1.
Insert the line cable into the socket labeled
"LINE".
2.
Connect the other end to your telephone line.
Printed Matters
H5358671_A4.pm6 4
Connecting the
Power and
Switching On
5
1.
Insert the power cable into the socket
located at the rear of the machine.
2.
Plug the cable into a wall socket.
Warning
T Power requirements: 220-240 V, 50/60 Hz
T Insert the power plug securely into the wall socket.
T Make sure that the wall outlet is near the machine
and readily accessible.
T Do not connect other equipment to the same socket.
3.
Turn the power switch on.
ZCKS170E
Before you can use the fax machine, you must
perform some simple initial settings.
6
00.12.8, 10:29 AM
4