Table of Contents
Advertisement
Adjusting Volume
You can change the volume of the fol-
lowing sounds the machine makes.
❖ ❖ ❖ ❖ On Hook Mode
Sounds when the { { { { On Hook Dial} } } }
key is pressed.
❖ ❖ ❖ ❖ At Transmission
Sounds when the machine sends a
message.
❖ ❖ ❖ ❖ At Reception
Sounds when the machine receives
a message.
❖ ❖ ❖ ❖ At Dialing
Sounds after pressing the { { { { Start} } } }
key until the line connects to the
destination.
❖ ❖ ❖ ❖ At Printing
Sounds when a received message
has been printed. See p.70 "Print
Completion Beep", Facsimile Refer-
ence (option) <Advanced Features> .
Limitation
❒ Adjusting Volume is not available
with the optional G4 line or the op-
tional Extra G3 line.
Note
❒ You can adjust the On Hook vol-
ume when you press the { { { { On Hook
Dial} } } } key. See p.41 "On Hook Dial",
Facsimile Reference (option) <Ad-
vanced Features> .
4. Troubleshooting
Press the { { { { User Tools/Counter/Inquiry} } } }
key (See p.5 "Control Panel"), then
[Facsimile Features] ⇒ [Gen. Settings/Ad-
just] ⇒ [Adjust Sound Volume].
A A A A
Press [Lower] or [Louder] for each
item.
Note
❒ You can hear the actual volume
by pressing [Check].
B B B B
Press [OK].
After adjusting is completed, re-
turn to the initial display.
Note
❒ If you press [Cancel], the volume
setting is canceled.
49
Advertisement
Table of Contents
