N? (Network Discovery Timeout); Network Commands; Ce (Node Messaging Options); Bh (Broadcast Hops) - Digi XLR PRO User Manual

AT commands
Parameter range
[read-only]
Default
0x23D

N? (Network Discovery Timeout)

Reports the maximum response time in milliseconds for ND (Network Discover) and DN (Discover
Node) responses. The timeout is based on NT (Node Discovery Timeout) and the network propagation
time.
Parameter range
[read-only]
Default
0x3C41

Network commands

The following commands are network commands.

CE (Node Messaging Options)

Sets the routing and messaging mode for the device. A device can be configured to route or not route
and configured to multi-hop packets when
(0x80).
Parameter range
An integer from 0 through 2:
Value Description
0
Standard router node. A standard router repeats directed broadcasts.
1
Not applicable.
2
Non-routing node.
Default
2

BH (Broadcast Hops)

Sets or displays the maximum number of transmission hops for directed broadcast data transmissions
when TO (Transmit Options) is configured for Directed Broadcast (0x80). For maximum hops, set the
value to 0. If BH is set to a value greater than the value for
used.
Parameter range
An integer from 0 through 4.
XLR PRO Radio Frequency (RF) Module User Guide
TO (Transmit Options) is configured for Directed Broadcast
NH (Network

Network commands

Hops), then the NH value is
48