Fn (Find Neighbors) - Digi XLR PRO User Manual

AT commands
For each discovered device, the following information is returned:
RESERVED<CR> (always 0xFFFE)
SH<CR> (4 bytes)
SL<CR> (4 bytes)
NI<CR> (Variable length, up to 20 bytes)
PARENT_NETWORK ADDRESS<CR> (always 0xFFFE)
DEVICE_TYPE<CR> (1 Byte: 0=Coord, 1=Router, 2=End Device)
STATUS<CR> (1 Byte: Reserved)
PROFILE_ID<CR> (2 Bytes)
MANUFACTURER_ID<CR> (2 Bytes)
DIGI DEVICE TYPE<CR> (4 Bytes. Optionally included based on settings.)
RSSI OF LAST HOP<CR> (1 Byte. Optionally included based on settings.)
<CR>
After the number of milliseconds set by the
ends by returning a carriage return (CR). Optionally, ND also accepts a as a parameter and only a
device that matches the identifier is returned.
If the ND command is sent through a local API frame, each response is returned as a separate Local or
Remote AT Command Response API packet, respectively. The data returned is the same without
carriage return delimiters. The string ends with a 0x00 (null) character.
Parameter range
N/A
Default
N/A

FN (Find Neighbors)

Discovers and reports all devices found within immediate RF range.
For each discovered device, the following information is reported:
RESERVED<CR> (always 0xFFFE)
SH<CR> (4 bytes)
SL<CR> (4 bytes)
NI<CR> (Variable length, up to 20 bytes)
PARENT_NETWORK ADDRESS<CR> (always 0xFFFE)
DEVICE_TYPE<CR> (1 Byte: 0=Coord, 1=Router, 2=End Device)
STATUS<CR> (1 Byte: Reserved)
PROFILE_ID<CR> (2 Bytes)
MANUFACTURER_ID<CR> (2 Bytes)
DIGI DEVICE TYPE<CR> (4 Bytes. Optionally included based on settings.)
RSSI OF LAST HOP<CR> (1 Byte. Optionally included based on settings.)
<CR>
If the FN command is issued in command mode, after the number of milliseconds set by the
(Network Discovery Timeout)
return (CR).
XLR PRO Radio Frequency (RF) Module User Guide
Addressing discovery and configuration commands
N? (Network Discovery Timeout)
parameter + overhead time, the command ends by returning a carriage
parameter, the command
N?
54