Download And Install Xctu; Connect Xlr Pro To Your Pc; Launch Xctu And Add The Xlr Pro; Configure Parameters Using Xctu - Digi XLR PRO User Manual

Configure the XLR PRO RF Module using XCTU

Download and install XCTU

For XLR PRO module support, maker sure you install XCTU version 6.3.0 or later.
To download and install XCTU:
1. Go to www.digi.com/xctu.
2. Launch the XCTU installer and follow the prompts on the installation screens.

Connect XLR PRO to your PC

To connect XLR PRO to your PC:
1. Connect the XLR PRO serial interface to your PC.
2. Power on the XLR PRO.

Launch XCTU and add the XLR PRO

To launch XCTU and add the XLR PRO:
1. Double-click on the XCTU program icon. The XCTU main menu appears.
2. Click the Add a radio icon
3. Provide connection information for the XLR PRO:
Select the Serial/USB port: Select the USB port connected to the XLR PRO.
n
Baud Rate: Select the default, 9600.
n
Data Bits: Select the default, 8.
n
Parity: Select the default, None.
n
Stop Bits: Select the default 1.
n
Flow Control: Select the default, None.
n
The radio module is programmable: Keep the default, unselected.
n
4. Click Finish. XCTU connects to the XLR PRO and displays the device in the list of radios.
5. Click the XLR PRO to display current properties and configure parameters in the right-hand
pane.

Configure parameters using XCTU

All of the XLR PRO parameter values are displayed in the XCTU configuration pane. For a complete list
of all parameters, see
To change a configuration parameter:
1. Locate the parameter in the XCTU configuration display.
2. Use the Search function in the upper right corner to quickly locate a parameter.
3. Select a new value for the parameter.
XLR PRO Radio Frequency (RF) Module User Guide
. The Add a radio device dialog appears.
AT commands.
Download and install XCTU
125