Antenna Port; Mechanical Drawings; Pinouts - Digi XLR PRO User Manual

About the XLR PRO RF Module

Antenna port

The antenna port is a 50 Ω MMCX RF signal connector for connecting to an external antenna.

Mechanical drawings

The following figures show the XLR PRO RF Module mechanical drawings. All dimensions are in inches.

Pinouts

The following table shows the pin assignments for the XLR PRO RF Module. In the table, low-asserted
signals have a horizontal line above signal name.
Pin
number Name
1 —
2 —
3 —
4 —
5 GND
6 VDD_5V
7 —
8 —
9 —
10 —
XLR PRO Radio Frequency (RF) Module User Guide
Default
direction Notes
— do not connect
— do not connect
— do not connect
— do not connect
—
Source
input
— do not connect
— do not connect
— do not connect
— do not connect
Antenna port
10