Fn (Find Neighbors); Diagnostic - Addressing Commands; N? (Network Discovery Timeout) - Digi XBee SX 868 User Manual

AT commands
If you send ND through a local API frame, the device returns each response as a separate AT_CMD_
Response packet. The data consists of the above listed bytes without the carriage return delimiters.
The NI string end in a "0x00" null character.
Parameter range
N/A
Default
N/A

FN (Find Neighbors)

Discovers and reports all devices found within immediate (1 hop) RF range. FN reports the following
information for each device it discovers:
MY<CR> (always 0xFFFE)
SH<CR>
SL<CR>
NI<CR> (Variable length)
PARENT_NETWORK ADDRESS<CR> (2 Bytes) (always 0xFFFE)
DEVICE_TYPE<CR> (1 Byte: 0 = Coordinator, 1 = Router, 2 = End Device)
STATUS<CR> (1 Byte: Reserved)
PROFILE_ID<CR> (2 Bytes)
MANUFACTURER_ID<CR> (2 Bytes)
DIGI DEVICE TYPE<CR> (4 Bytes. Optionally included based on NO settings.)
RSSI OF LAST HOP<CR> (1 Byte. Optionally included based on NO settings.)
<CR>
If you send the FN command in Command mode, after (NT*100) ms + overhead time, the command
ends by returning a carriage return, represented by <CR>.
If you send the FN command through a local API frame, each response returns as a separate Local or
Remote AT Command Response API packet, respectively. The data consists of the bytes in the
previous list without the carriage return delimiters. The NI string ends in a 0x00 null character.
Parameter range
N/A
Default
N/A

Diagnostic - addressing commands

The following AT command is a Diagnostic - addressing command.

N? (Network Discovery Timeout)

The maximum response time, in milliseconds, for ND (Network Discovery) responses and DN (Discover
Node) responses. The timeout is based on the NT (Network Discovery Back-off Time) and the network
propagation time.
XBee® SX 868 RF Module User Guide
Diagnostic - addressing commands
104