Receiver Selectivity; Interface Data Rate (Software Selectable); Networking And Security Specifications; Power Requirements - Digi XLR PRO User Manual

Technical specifications

Receiver selectivity

RF data rate
141 kb/s

Interface data rate (software selectable)

UART interface
UART
SPI

Networking and security specifications

The following table describes the networking and security specifications for the devices.
Item
Supported network topologies
Encryption

Power requirements

The following table describes the power requirements for the XLR PRO RF Module.
Item
Supply voltage
Receive current
Transmit current
Shutdown/power down current

Environmental

Specification
Operating temperature

Regulatory conformity summary

This table describes the agency approvals for the devices.
XLR PRO Radio Frequency (RF) Module User Guide
Selectivity
70 dB (below 908 MHz, above 922 MHz)
40 dB (908 MHz to 922 MHz)
Serial data rate
Up to 921.6 kb/s
Up to 6 Mb/s
Specification
Point-to-point/point-to-multipoint
128-bit AES
Value
3.8 to 5.5 VDC (see
@ 5 VDC
@ 5 VDC
3 µA typical at room temperature

Receiver selectivity

Electrical specifications)
295 mA typical
1.58 A typical
Description
-40° C to 85° C
19