AT commands
Default
N/A
MAC/PHY commands
The following AT commands are MAC/PHY commands.
ID (Network ID)
Sets or displays the network identifier for the module. To communicate with other modules in a
network, the modules must have matching network identifiers. If you are using OEM network
identifiers, set ID to FFFF to use the factory value.
Parameter range
0 - 0x7FFF
Default
0x7FFF
BR (RF Data Rate)
Sets or displays the rate at which RF data is transmitted for all operational modes. Devices within a
network do not need to have matching data transmission rates. The BR setting does not control the
rate at which devices receive data.
Range
An integer from 0 through 8:
Value
0
1
2
3
4
5
6
7
8
Default
4
XLR PRO Radio Frequency (RF) Module User Guide
Description
9.38 kb/s
28.14 kb/s
65.66 kb/s
140.7 kb/s
290.8 kb/s
590.9 kb/s
1.191 Mb/s
2.392 Mb/s
3.189 Mb/s
MAC/PHY commands
44