Xlr Pro Modular Development Board Leds - Digi XLR PRO User Manual

Getting started with the XLR PRO RF Module
CAUTION! The thermal gasket for the XLR PRO RF Module is subject to wear and tear.
We recommend that you limit the number of insertions of the XLR PRO RF Module.

XLR PRO Modular Development Board LEDs

The board contains the following LEDs:
RSSI
The RSSI LEDs display the fade margin present in an active wireless link. Unilluminated LEDs indicate a
very weak or nonexistent signal. Three illuminated LEDs indicate a strong signal. The RSSI LEDs only
illuminate for a few seconds after a valid RF packet is received.
DOUT/DIN/ASSOC
An illuminated yellow LED for DOUT indicates that DIO13/DOUT is low. An illuminated white LED for
DIN indicates DIO14/DIN/CONFIG is low. An illuminated blue LED for ASSOC shows that DIO5/ASSOC is
high.
XLR PRO Radio Frequency (RF) Module User Guide
Development Board for the XLR PRO RF Module
23