Digi XLR PRO User Manual page 2

Revision history—90001407
Revision Date
A October
2015
B October
2016
C December
2017
D May 2018
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2018 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Send comments
Documentation feedback: To provide feedback on this document, send your comments to
techcomm@digi.com.
Customer support
Digi Technical Support: Digi offers multiple technical support plans and service packages to help our
customers get the most out of their Digi product. For information on Technical Support plans and
pricing, contact us at +1 952.912.3444 or visit us at www.digi.com/support.
XLR PRO Radio Frequency (RF) Module User Guide
Description
Updated to include full descriptions of all XLR PRO RF Module features.
Added several I/O settings commands. Added a getting started section for
the development kit. Added mechanical drawings. Revised the AT command
and API frame sections. Added Australian certification information.
Added information about heat dissipation and using a heat sink. Added RF
power level saturation information.
Added note on range estimation. Changed IC to ISED.
2