Getting Started
Step 2: Download and install XCTU
This section contains download and install instructions based on operating system. XCTU is
compatible with Linux, OSX, and Windows. It may be necessary to configure your system prior to
installing XCTU for the first time.
If you get stuck, see
Download and install XCTU - Windows
Follow the steps below to download and install XCTU on your computer.
1. Go to www.digi.com/xctu.
2. Click Download.
3. Under Download XCTU, click the Windows installer link.
4. Once the download is complete, run the executable file and follow the steps in the XCTU Setup
Wizard.
XBee 868LP RF Modules User Guide
XCTU installation
error.
Set up your XBee modules
32