Step 1: Download And Install Xctu - Digi XBee 868LP User Manual

Get started
1. Attach the XBee 868LP RF Modules to the development boards.
2. Attach the antennas to the devices.
3. Connect the USB cables to the development boards.
CAUTION! Before you remove a device from a development board, make sure the board is
not powered by a USB cable or a battery.

Step 1: Download and install XCTU

This section contains download and install instructions based on operating system. XCTU is
compatible with Linux, OSX, and Windows. It may be necessary to configure your system prior to
installing XCTU for the first time.
If you get stuck, see
XBee 868LP RF Modules User Guide
XCTU installation error.
Set up the devices
33