Table of Contents
Advertisement
Maintenance and cleaning
Cleaning materials
11.1
Not applicable
11.1.1
52
───
WARNING
Ensure safe condition for cleaning work
Basically, electronic devices are not fail-safe. The condition is al-
ways safe when the unit is switched off and not energized. For
cleaning work, place the connected servo drives and the machine
in a safe state.
Carrying cleaning work during operation can lead to serious or fa-
tal injuries.
Do not immerse or spray the servo drive
Wipe off the servo drive only with a cleaning agent and a cloth.
Due to impermissible solutions, cleaning by immersion can lead to
damage to the surface and the servo drive as well as to leak-tight-
ness problems.
Contamination, dust or chips can have a negative effect on the func-
tion of the components. In the worst case, contamination can lead to
failure. Therefore, clean and service the components at regular in-
tervals.
Carefully clean the components with a damp cloth or brush.
Use grease-dissolving and non-aggressive cleaning agents such as
isopropanol for cleaning. You will also receive information about
non-approved cleaning agents.
Cleaning agents
Aniline hydrochloride
Bromine
Sodium hypochlorite; bleaching
solution
Mercury (II) chloride
Hydrochloric acid
AMI8100
Chemical formula
C
H
NH
HCI
6
5
2
Br
2
NaCIO
HgCl
2
HCI
Version: 1.0
Advertisement
Table of Contents
