Setting up projector
profiles
Use the projector profiles to store configured settings so you can switch between the profiles as
required.
Creating a new projector profile
Save the projector configuration to a profile so you can revert to those saved settings any time. You
can save up to 10 projector profiles.
1. Configure the projector settings you want to save to the profile.
2. Select MENU > Admin > Projector Profiles.
3. Select an empty profile.
4. Next to New Profile, select Create.
5. In the dialog, enter a new profile name.
6. Select Save.
Importing a projector profile
Import projector profiles set on different projectors using a USB flash drive (projector) or file (web
interface).
1. If using the display panel, insert the USB flash drive containing the projector profile file into
the USB port on the projector.
2. Select MENU > Admin > Projector Profiles.
3. Select an empty profile.
4. Next to Import From File, select Import.
5. Select a projector profile file.
•
On the projector, from the File Selection dialog, select a projector profile file.
•
From the web interface, in the Open dialog, navigate to the file and select Open.
The projector profile file is imported to the projector.
Restoring settings from a profile
Return the projector to the configuration specified in a specific projector profile.
1. Select MENU > Admin > Projector Profiles.
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
50