Setting Voice Regional Parameters; Call Progress Tones - Cisco SPA50X User Manual

Using the Phone Web User Interface

Setting Voice Regional Parameters

Setting Voice Regional Parameters
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
This section describes the fields for the Regional tab.

Call Progress Tones

Parameter
Dial Tone
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Call Waiting Tone
Description
Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to
enter an external phone number, as opposed to an
internal extension. It is triggered by a, (comma)
character encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Prompts the user to enter a call forwarding phone
number.
Defaults to 520@-19,620@-19;10(*/0/1+2).
Played when a 486 RSC is received for an
outbound call.
Defaults to 480@-19,620@-19;10(.5/.5/1+2).
Played when an outbound call has failed or after
the far end hangs up during an established call.
Reorder Tone is played automatically when <Dial
Tone> or any of its alternatives times out.
Defaults to 480@-19,620@-19;10(.25/.25/1+2).
Played when the caller has not properly placed
the handset on the cradle. Off Hook Warning Tone
is played when Reorder Tone times out.
Defaults to 480@10,620@0;10(. 1 25/. 1 25/1+2).
Played during an outbound call when the far end
is ringing.
Defaults to 440@-19,480@-19;*(2/4/1+2).
Played when a call is waiting.
Defaults to 440@-10;30(.3/9.7/1)
5
51