Traction Circuit Relief Valve (R3) And (R4) Pressure Test (5410/5410-G/5410-D/5510/5510-G/5510-D/5610) - Toro Reelmaster 5410 Series Service Manual

Traction Circuit Relief Valve (R3) and (R4) Pressure Test
(5410/5410-G/5410-D/5510/5510-G/5510-D/5610)
g230018
Test Procedure
Reelmaster ® 5410/5510/5610 Series
15216SL Rev C
The traction circuit relief pressure test should be performed to ensure that the
forward and reverse traction circuit relief pressures are correct.
1. Drive machine to an open area. Park machine on a level surface with the
cutting units lowered and disengaged. Ensure that the engine is shut off.
Apply the parking brake.
2. Read all Warning, Cautions, and precautions listed at the beginning of this
section.
Figure 80
Page 6–59 Hydraulic System: Testing the Hydraulic System