Servicing The Mow Control Manifold Assembly - Toro Reelmaster 5410 Series Service Manual

Servicing the Mow Control Manifold Assembly

g216663
1. Backlap spool (front cutting units)
2. #4 zero-leak plug
3. Orifice (0.040) (2 each)
4. Spool handle
5. Spring pin (2 each per spool)
Reelmaster ® 5410/5510/5610 Series
15216SL Rev C
6. Backlap spool (rear cutting units)
7. #6 zero-leak plug
8. Mow control manifold
9. Solenoid proportional valve (SP1)
10. Solenoid coil (2 each)
Note: The ports on the mow control manifold are marked for easy identification
of the components. Example: P1 is the pump P1 connection port and RV2 is
the location for the solenoid relief valve RV2; refer to the Hydraulic Schematic in
Appendix A (page A–1)
valves at each manifold port.
Figure 164
11.
12.
13.
14.
to identify the function of the hydraulic lines and cartridge
Page 6–191
Nut (2 each)
Solenoid proportional valve (SP2)
Relief valve (RV1)
Relief valve (RV2)
Hydraulic System: Service and Repairs