Raising the Rear of the Machine
Safety and Instructional Decals
Reelmaster
®
5410/5510/5610 Series
15216SL Rev C
g186591
1.
Rear wheel
1. Set the parking brake and block the 2 front wheels with chocks to prevent
the machine from moving.
2. Position the jack securely at the center of the rear axle under the axle pivot
bracket. Lift the rear of the machine off the ground.
3. Position the jack stands under the frame to support the machine
Numerous safety and instruction decals are affixed to the traction unit and
cutting units of your Reelmaster. If any decal becomes illegible or damaged,
install a new decal. Decal part numbers are listed in your Parts Catalog. Order
replacement decals from Authorized Toro Distributor.
Figure 3
2.
Rear axle pivot bracket
Page 1–7
3.
Jack stand location
(Figure
Safety: Safety and Instructional Decals
3).