Engine Faults - Toro Reelmaster 5410 Series Service Manual

Engine Faults

Reelmaster ® 5410/5510/5610 Series
15216SL Rev C
g187359
1. Engine fault (Yanmar diesel engine)
The engine faults are generated by the Yanmar engine ECU to identify an
electrical system malfunction (fault) pertaining to the engine during operation.
When an engine fault occurs, the fault indicator will flash and the InfoCenter will
display information about the fault. The number of flashes and/or the flashing
pattern vary depending on the type or source of the fault, enabling quick-fix.
Depending on the severity of the fault, a Stop icon may display as well.
The Toro Electronic Controllers (TECs) can also generate electrical faults. The
faults generated by the TECs are specific to the machine; refer to
Faults (page 7–32).
If an engine fault occurs:
1. The engine fault information will be displayed on the InfoCenter
2. If a Stop fault is displayed on the InfoCenter, the operator should cease
operation of the machine and the engine as quickly and as safely as possible
to reduce damage to the engine.
3. If a Check Engine fault is displayed on the InfoCenter, the operator should
take the machine for service as soon as possible.
4. Return to the previous screen by pressing the menu/back button (as indicated
by the at the bottom of the screen).
The engine fault will continue to appear until the fault is cleared. In order to clear
the displayed fault, the engine problem has to be resolved. Refer to the Yanmar
Engine Service Manual and Troubleshooting Manual for additional information.
Note: The engine faults that are no longer active are stored in the Yanmar
engine ECU and can only be viewed by using the engine diagnostic tool. Contact
your Toro distributor for any assistance in the Yanmar engine troubleshooting.
Figure 218
Page 7–35
Machine
(Figure
Electrical System: Troubleshooting
218).