Service Screen - Toro Reelmaster 5410 Series Service Manual

Service Screen

Electrical System: InfoCenter Display
g189677
1. Service screen (hours)
2. Left/right button
3. Down button
The service screen (Figure
including hours, counts, and DPF regeneration. Values listed for these service
menu items cannot be changed. If the correct passcode (PIN) has been entered
(refer to the Protected Menus in the
screen provides information on DPF ash accumulation and allows resetting the
Service Due timer. To scroll through the list of service records and view the
current values, press the down button (as indicated by the at the
the screen).
To return to the previous screen, press the menu/back button (as indicated by
the at the bottom of the screen).
Hours provides access to the following information:
•
Key On identifies the number of hours that the key switch has been in the
O position.
N
•
Engine Run identifies the number of hours that the engine has been running.
•
PTO On identifies the number of hours that the machine has been operated
with the cutting units engaged.
•
High Range identifies the number of hours that the machine has been
operated in H (transport) speed range.
IGH
•
Service Due identifies the number of hours before the next scheduled
maintenance is due. This is a count down timer and the numbers of hours
displayed will decrease as the machine is used.
•
Service Reset (PIN required) identifies the total number of hours between
scheduled maintenance intervals. Reset the Service Due timer to the service
interval (250 hours) by pressing the left/light button (as indicated by the
the bottom of the screen) and then pressing the down button (as indicated by
the Yes or at the bottom of the screen).
Counts provides access to the following information:
•
Engine Starts identifies the number of times that the engine has been started.
Figure 209
4. Menu/back button
5. Service items
209) contains operational information of the machine
Settings Screen (page
Page 7–18
7–21)) the service
bottom of
Reelmaster ® 5410/5510/5610 Series
15216SL Rev C
at