Pushing or Towing the Traction Unit
Reelmaster
®
5410/5510/5610 Series
15216SL Rev C
If towing limits are exceeded, severe damage to the piston (traction)
pump may occur.
g186201
1.
Piston (traction) pump
If it becomes necessary to tow or push the machine, tow or push at a speed
below 4.8 km/h (3mph), and for a very short distance. If you must move the
machine a considerable distance (more than a few feet), transport it on a truck or
trailer. The piston (traction) pump is equipped with a bypass valve that needs
to be loosened for towing or pushing
Operator's Manual for towing procedures.
IMPORTANT
Figure 57
2.
Bypass valve
(Figure
57). Refer to the Traction Unit
Page 6–7
Hydraulic System: General Information