DS-77xxNXI-I4/16P/4S NVR User Manual
2. Check Enable. A message will pop up to prompt possible security risk and click Yes to continue.
3. Configure the SNMP settings as needed.
•
Trap Address: IP address of the SNMP host.
•
Trap Port: Port of the SNMP host.
4. Click Apply.
16.7 Configure E-Mail
Purpose
The system can be configured to send an e-mail notification to all designated users when a specified
event occurs such as when an alarm or motion event is detected or the administrator password is
changed, etc.
Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server. The
network must also be connected to either an intranet or the Internet depending on the location of the e-
mail accounts to which you want to send notification.
1. Go to System > Network > Advanced > Email.
UM DS-77xxNXI-I4/16P/4S 050619NA
Figure 16-9 SNMP Settings
148