Call Linear Scan; One-Touch Park - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual
left of the right limit, and the angle from the left limit to the right limit should be no more than 180º.

6.3.8 Call Linear Scan

Before operating this function, make sure the connected camera supports linear scan and is in HIKVISION
protocol.
Purpose
Follow this procedure to call the linear scan in the predefined scan range.
1. Click on the quick settings toolbar of the PTZ camera live view. The PTZ control panel displays on
the right of the interface.
2. Click Linear Scan to start the linear scan and click it again to stop it.
3. (Optional) Click Restore to clear the defined left limit and right limit data.
Reboot the camera to have the settings take effect.

6.3.9 One-Touch Park

Before operating this function, make sure the connected camera supports linear scan and is in HIKVISION
protocol.
Purpose
Certain dome models can be configured to start a predefined park action (scan, preset, patrol, etc.)
automatically after a period of inactivity (park time).
1. Click on the quick settings toolbar of the PTZ camera live view. The PTZ control panel displays on
the right of the interface.
2. Click Park (Quick Patrol), Park (Patrol 1) or Park (Preset 1) to activate the park action.
•
Park (Quick Patrol): The dome starts the patrol from predefined preset 1 to preset 32 in order after the
park time. Undefined presets will be skipped.
•
Park (Patrol 1): The dome starts moving according to the predefined patrol 1 path after the park time.
•
Park (Preset 1): The dome moves to the predefined preset 1 location after the park time.
The park time can be set only via the dome configuration interface. The value is 5 s by default.
3. Click Stop Park (Quick Patrol), Stop Park (Patrol 1) or Stop Park (Preset 1) to de-activate it.
UM DS-77xxNXI-I4/16P/4S 050619NA 63