Add The Automatically Searched Online Ip Cameras; Manage Cameras For Poe Device; Add Poe Cameras; Add Non-Poe Ip Cameras - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual

3.1.2 Add the Automatically Searched Online IP Cameras

1. On the Camera Management interface, click the Online Device panel to expand the Online Device
interface.
2. Select the automatically searched online devices.
3. Click Add.
If the IP camera to add has not been activated, you can activate it from the IP camera list on the camera
management interface.

3.2 Manage Cameras for PoE Device

Purpose
The PoE interfaces enable the device system to pass electrical power safely, along with data, on Ethernet
cabling to the connected PoE cameras. The number of supported PoE cameras varies by device model.
For each PoE interface you disable, you can connect an online network camera, up to the maximum
number of channels the NVR supports. The PoE interface supports Plug-and-Play.
For example, for a DS-7716NXI-I4/16P/4S, which has 16 PoE ports and 16 channels, if you want to connect
eight network cameras via PoE interfaces and eight online cameras, you must disable eight PoE interfaces
in the Edit IP Camera menu.
Follow the steps to add network cameras for device supporting PoE function.

3.2.1 Add PoE Cameras

1. Connect PoE cameras to the device PoE ports with network cables.
2. Go to Camera > Camera > IP Camera to view camera image and information.

3.2.2 Add Non-PoE IP Cameras

You can disable PoE interfaces by selecting manual, while the current channel can be used as a normal
channel and the parameters can be edited.
1. Go to Camera > Camera > IP Camera.
2. Position the cursor on a window with no linked IP camera and click the button.
UM DS-77xxNXI-I4/16P/4S 050619NA 42