Chapter 15 Pos Configuration; Configure Pos Settings; Configure Pos Connection - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual

Chapter 15 POS Configuration

The device can be connected with to a POS machine/server and receive transaction messages for overlay
on the image during live view or playback, as well as trigger the POS event alarm.

15.1 Configure POS Settings

15.1.1 Configure POS Connection

1. Go to System > POS Settings.
2. Click Add to enter the POS adding interface.
3. Select a POS from the drop-down list.
4. Check Enable.
The number of POS devices supported by each NVR is half its number of channels.
5. Set the POS protocol to Universal Protocol, EPSON, AVE, or NUCLEUS, as appropriate.
When the new protocol is selected, reboot the device to activate the new settings.
•
Universal Protocol − Click the Advanced button to expand more settings when selecting universal
protocol. You can set the start line identifier, line break tag, end line tag for the POS overlay
characters, and the case-sensitive property of the characters. You can also optionally check the
filtering identifier and the XML protocol.
UM DS-77xxNXI-I4/16P/4S 050619NA
Figure 15-1 POS Settings
137