HIKVISION DS-7716NXI-I4/16P/4S User Manual page 124

DS-77xxNXI-I4/16P/4S NVR User Manual
3. Select a Camera to configure.
4. Check Enable Region Entrance Detection.
5. (Optional) Check Save VCA Picture to save the captured pictures of region entrance detection.
6. Set Target Detection as Human Body or Vehicle.
•
Human Body: Discard non-human body pictures and videos not triggered by region entrance detection.
•
Vehicle: Discard non-vehicle pictures and videos not triggered by region entrance detection.
7. Follow the steps to set the detection rules and detection areas.
1) Select an Arming Region to configure. Up to four regions are selectable.
2) Drag the sliders to set Sensitivity.
• Sensitivity: The higher the value, the more easily the detection alarm can be triggered. Its range
is [0-100].
3) Click Draw Region and draw a quadrilateral in the preview window by specifying four vertexes of the
detection region.
8. Configure Arming Schedule and Linkage Action.
9. Click Apply.
UM DS-77xxNXI-I4/16P/4S 050619NA
Figure 12-6 Region Entrance Detection
124