DS-77xxNXI-I4/16P/4S NVR User Manual
5.1.2 3D Positioning
3D Positioning zooms in/out of a specific area of a live image.
1. In live view mode, click
2. Operate the zoom in/out in the image.
•
Zoom In − Use the left mouse key to click on the desired position in the video image, and drag a
rectangular area in the lower right direction to zoom in.
•
Zoom Out − Use the left mouse key to drag a rectangular area in the upper left direction to move the
position to the center and enable the rectangle area to zoom out.
5.1.3 Live View Strategy
1. In live view mode, click
2. Set the live view strategy to Real-time, Balanced, or Fluency.
5.2 Configure Live View Settings
Live View settings can be customized according to need. You can configure the output interface, dwell
time for screen to be shown, mute or turn on the audio, the screen number for each channel, etc.
1. Go to System > Live View > General.
UM DS-77xxNXI-I4/16P/4S 050619NA
Figure 5-2 Digital Zoom
to enter the 3D positioning mode.
to enter the digital zoom operation interface in full screen mode.
51