Intrusion Detection - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual
•
B->A: Only an object crossing the configured line from the B side to the A side can be detected.
3) Drag the Sensitivity slider to set the detection sensitivity. The higher the value, the more easily the
detection alarm can be triggered.
4) Click Draw Region and set two points in the preview window to draw a virtual line.
8. Draw the maximum size/minimum size for targets. Only targets the size of which ranges from maximum
to minimum will trigger line crossing detection.
1) Click Max. Size/Min. Size.
2) Draw an area in the preview window.
3) Click Stop Drawing.
9. Set the arming schedule. Refer to
10. Set the linkage actions. Refer to
11. Click Apply.

12.5 Intrusion Detection

Purpose
Intrusion detection detects people, vehicles, or other objects that enter and loiter in a pre-defined virtual
region, and certain actions can be taken when the alarm is triggered.
1. Go to System > Event > Smart Event.
2. Click Intrusion.
UM DS-77xxNXI-I4/16P/4S 050619NA
Chapter 11.1 Configure Arming Schedule
Chapter 11.2 Configure Alarm Linkage Actions
.
.
121