Configure Alarm Output - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual

11.6.3 Configure Alarm Output

Trigger an alarm output when an alarm is triggered.
1. Go to System > Event > Normal Event > Alarm Output.
2. Select an alarm output item from the list and click
3. Edit the alarm name.
4. Select the dwell time (the alarm duration) from 5s to 600s, or Manually Clear.
•
Manually Clear: Manually clear an alarm when one occurs. Refer to
Output Manually
5. Set the arming schedule. Refer to
6. (Optional) Click Copy to copy the same settings to other alarm output(s).
UM DS-77xxNXI-I4/16P/4S 050619NA
for detailed instructions.
Chapter 11.1 Configure Arming Schedule
Figure 11-9 Alarm Output
.
Chapter 11.8 Trigger or Clear Alarm
.
112