Chapter 6 Ptz Control; Ptz Control Wizard; Configure Ptz Parameters - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual

Chapter 6 PTZ Control

6.1 PTZ Control Wizard

Before You Start
Make sure the connected IP camera supports the PTZ function and is properly connected.
Purpose
Follow the PTZ control wizard to guide you through the basic PTZ operation.
1. Click on the quick settings toolbar of the PTZ camera live view. The PTZ control wizard pops up.
Figure 6-1 PTZ Control Wizard
2. Follow the wizard to adjust the PTZ view, focus, and zoom in/out the camera.
3. (Optional) Check the Do not show this prompt again checkbox.
4. Click OK to exit.

6.2 Configure PTZ Parameters

Purpose
Follow this procedure to set the PTZ parameters. Configure the PTZ parameters before you control the PTZ
camera.
1. Click on the quick settings toolbar of the PTZ camera live view. The PTZ control panel displays on
the right of the interface.
2. Click PTZ Parameters Settings to set the PTZ parameters.
UM DS-77xxNXI-I4/16P/4S 050619NA 56