Manage Ip Camera Activation - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual
Result:
The added user accounts will have permission to connect other devices to the NVR via ONVIF protocol.
ONVIF protocol is disabled by default.

18.7.3 Manage IP Camera Activation

When you activate the NVR for first-time access, you can set the activation password for the IP camera(s)
as well. You can also manage the password to enhance the security.
1. Go to System > System Service > IP Camera Activation.
2. Check the Change Password checkbox to enable the permission.
3. Enter the device admin password to obtain the permission.
Figure 18-16 Change IP Camera Activation Password
4. Enter a new strong password for the cameras in the IP Camera Activation Password text field.
5. Click Apply to show the following pop-up attention box.
Figure 18-17 Attention
6. Click Yes to duplicate the current password to the IP cameras that are connected with the default
protocol.
UM DS-77xxNXI-I4/16P/4S 050619NA 166