DS-77xxNXI-I4/16P/4S NVR User Manual
•
Video Output Interface: Select the video output interface.
•
Live View Mode: Select the display mode for live view, e.g., 2*2, 1*5, etc.
•
Dwell Time: The time in seconds to dwell between switching cameras when enabling auto-switch.
The range is from 5s to 300s.
3. Go to View Settings to set the view layout.
4. Click OK to save the settings.
5.5 Configure Channel-Zero Encoding
Purpose
You can enable channel-zero encoding when you need to view many channels remotely in real time from a
Web browser or CMS (Client Management System) software, by decreasing the bandwidth requirement
without affecting the image quality.
1. Go to System > Live View > General.
2. Select the video output interface to Channel-Zero.
3. Go to System > Live View > Channel-Zero.
4. Check the Enable Channel-Zero Encoding checkbox.
5. Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate. Higher frame rate and bitrate settings
result in a higher bandwidth requirement.
6. Click Apply.
Result:
You can view all the channels in one screen using the CMS or a Web browser.
UM DS-77xxNXI-I4/16P/4S 050619NA
Figure 5-5 Live View − Channel-Zero Encoding
54