One-Touch Creation; Manual Creation - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual

8.1.2 One-Touch Creation

Purpose
One-touch configuration helps you quickly create a disk array. By default, the array type created by one-
touch configuration is RAID 5.
Before You Start
Enable the RAID function.
Install at least three HDDs. If more than 10 HDDs are installed, two arrays will be created. To maintain
reliable and stable HDDs, it is recommended to use enterprise-level HDDs with the same model and
capacity.
1. Go to Storage > RAID Setup > Physical Disk.
Figure 8-2 Physical Disk
2. Click One-touch Config.
3. Edit the array name in the Array Name text field.
4. Click OK to start configuring.
If you install four HDDs or more, a hot spare disk for array rebuilding will be created.
5. A message box will pop up when the array creation is completed, click OK on it.
6. Optionally, the device will automatically initialize the created array. Go to Storage > RAID Setup > Array
to view the created arrray's information.

8.1.3 Manual Creation

Purpose
Manually create the array of RAID 0, RAID 1, RAID 5, RAID 6, and RAID 10.
1. Go to Storage > RAID Setup > Physical Disk.
2. Click Create.
UM DS-77xxNXI-I4/16P/4S 050619NA 81