Region Entrance Detection - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual
if the percentage is 50%, if an object enters the region and occupies half of the whole region,
the device will trigger an alarm. Its range is [1-100].
3) Click Draw Region and draw a quadrilateral in the preview window by specifying four vertexes of the
detection region.
8. Draw the maximum size/minimum size for targets. Only targets the size of which range from maximum
to minimum will trigger intrusion detection.
1) Click Max. Size/Min. Size.
2) Draw an area in the preview window.
3) Click Stop Drawing.
9. Set the arming schedule. Refer to
10. Set the linkage actions. Refer to
11. Click Apply.

12.6 Region Entrance Detection

Purpose
Region entrance detection detects objects that enter a pre-defined virtual region.
1. Go to System Management > Event Settings > Smart Event.
2. Click Region Entrance Detection.
UM DS-77xxNXI-I4/16P/4S 050619NA
Chapter 11.1 Configure Arming Schedule
Chapter 11.2 Configure Alarm Linkage Actions
.
.
123