Configure Tcp/Ip - HIKVISION DS-9600NI-I16 DS-9616NI-I16 User Manual

supported resolutions include 1024 × 768 and above.
Steps
1. Enter the IP address in web browser, and then press Enter. The default IP address is
192.168.1.64.
2. Set the password for the admin user account.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
3. Click OK.

1.2 Configure TCP/IP

TCP/IP must be properly configured before operating your device over a network. Both IPv4 and
IPv6 are available.
Steps
1. Go to System → Network → TCP/IP.
Network Video Recorder User Manual
Figure 1-7 Web Browser Activation
7