DS-77xxNXI-I4/16P/4S NVR User Manual
To use the HDD even if S.M.A.R.T. checking has failed, check the Continue to use the disk when self-
evaluation is failed checkbox.
18.1.3 Bad Sector Detection
1. Go to Maintenance > HDD Operation > Bad Sector Detection.
2. Select the HDD No. in the drop-down list you want to configure.
3. Select All Detection or Key Area Detection as the detection type.
4. Click the Self-Test button to start the detection.
•
You can also pause/resume or cancel the detection.
•
After testing has completed, you can click Error information button to see the detailed damage
information.
18.1.4 HDD Health Detection
Purpose
You can view the health status of a Seagate HDD that was built after October 1, 2017, with a capacity from
4 TB to 8 TB. The function helps you to troubleshoot HDD problems. Compared to the S.M.A.R.T function,
HDD Health Detection shows the HDD status with more details.
1. Go to Maintenance > HDD Operation > Health Detection.
UM DS-77xxNXI-I4/16P/4S 050619NA
Figure 18-4 Bad Sector Detection
157