DS-77xxNXI-I4/16P/4S NVR User Manual
15.1.2 Configure POS Text Overlay
1. Go to System > POS Settings.
2. Click the Channel Linkage and Display tab.
3. Select the linked channel to overlay the POS characters.
4. Set the characters overlay for the enabled POS.
•
Character encoding format: currently the Latin-1 format is available
•
Overlay mode of the characters to display in scrolling or page mode
•
Font size and font color
•
Display time (sec) of the characters (the value ranges from 5-3600 sec.)
•
Timeout of POS event. The value ranges 5-3600 sec. When the device has not received the POS
message by the defined time, the transaction is finished.
5. In Privacy Settings, set the POS privacy information to not display on the image, e.g., the card number
or user name, etc. The defined privacy information will be displayed as *** on the image instead.
6. (Optional) Check the checkbox to enable the Overlay POS in Live View. When this feature is enabled,
the POS information can be overlaid on the live view image.
You can adjust the textbox size and position on the POS settings preview screen by dragging the frame.
7. Click Apply to activate the settings.
UM DS-77xxNXI-I4/16P/4S 050619NA
Figure 15-7 Overlay Character Settings
141