DS-77xxNXI-I4/16P/4S NVR User Manual
8.2.3 Manually Rebuild Array
Purpose
If no hot spare disks are configured, rebuild the degraded array manually.
Before You Start
At least one available physical disk should exist for rebuilding the array.
1. Go to Storage > RAID Setup > Array.
Figure 8-6 Array List
2. Click
of degraded array.
Figure 8-7 Rebuild Array
3. Select the available physical disk.
4. Click OK.
5. Click OK on the pop-up message box "Do not unplug the physical disk when it is under rebuilding."
UM DS-77xxNXI-I4/16P/4S 050619NA
84