DS-77xxNXI-I4/16P/4S NVR User Manual
HTTP
You can choose to disable HTTP, or set HTTP authentication when it is enabled on demand to enhance the
access security.
By default, HTTP service is enabled.
Set HTTP Authentication
Purpose
If you need to enable the HTTP service, you can set HTTP authentication to enhance the access security.
1. Go to System > System Service > System Service.
Figure 18-13 HTTP Authentication
2. Check the Enable HTTP checkbox to enable the HTTP service.
3. Select digest as the HTTP Authentication in the drop-down list.
4. Click Save to save the settings.
Two authentication types are selectable: digest and digest/basic. For security reasons, it is
recommended to select digest as the authentication type.
Disable HTTP
Purpose
The admin user account can disable the HTTP service from the GUI or the Web browser.
After the HTTP is disabled, all its related services, including the ISAPI, ONVIF, and Genetec, will terminate
as well.
1. Go to System > System Service> System Service.
2. Uncheck the Enable HTTP to disable the HTTP service.
RTSP Authentication
Purpose
You can specifically secure the live view stream data by setting the RTSP authentication.
1. Go to System > System Service > System Service.
UM DS-77xxNXI-I4/16P/4S 050619NA
164