Configuration And Parameterization Of The I/O Modules; Digital I/O Modules - WAGO I/O SYSTEM 750 750-833 Manual

5.4 Configuration and Parameterization of the I/O Modules

Note
For simplification only the item numbers are shown as module designation in
the table. The module „750-400" thus corresponds to the module
„750-400 2 DI/24 V DC/3.0 ms"

5.4.1 Digital I/O Modules

All binary I/O modules contain 3 bytes of extended parameterization
information, which serve, amongst others, for the identification of the internal
bus and the structure of the mapping table. For modules capable of
diagnostics, the diagnostics message can be suppressed or released channel for
channel or module for module. Binary outputs offer the possibility of
switching to a predetermined state in the case of a master failure.
WAGO-I/O-SYSTEM 750
Bus System
Configuration and Parameterization of the I/O Modules
I/O Modules • 161