Internal Bus/Data Contacts - WAGO I/O SYSTEM 750 750-833 Manual

30 • The WAGO-I/O-SYSTEM 750
Mechanical Setup

2.6.7 Internal Bus/Data Contacts

Communication between the coupler/controller and the bus modules as well as
the system supply of the bus modules is carried out via the internal bus. It is
comprised of 6 data contacts, which are available as self-cleaning gold spring
contacts.
Fig. 2-7: Data contacts
Warning
Do not touch the gold spring contacts on the I/O modules in order to avoid
soiling or scratching!
ESD (Electrostatic Discharge)
The modules are equipped with electronic components that may be destroyed
by electrostatic discharge. When handling the modules, ensure that the
environment (persons, workplace and packing) is well grounded. Avoid
touching conductive components, e.g. data contacts.
p0xxx07x
WAGO-I/O-SYSTEM 750
Bus System