Fault Indication: Attendant Control - Otto Bock skippi Instructions For Use Manual

8.2.2 Fault indication: Attendant control

LED indicator
Red is flashing Battery under voltage
Green is flashing Battery over voltage
Mode LED (see fig. 36, item 4)
Red is flashing Various product faults
Seat function LEDs (see fig. 36, item 5)
Backrest LED is Back angle adjustment
flashing motor fault
Seat LED is
Seat tilt motor fault
flashing
2 LEDs below seat Seat height adjustment
are flashing motor fault
Backrest / seat Electric seat function
LED is flashing temperature warning
Tab. 10 Attendant control fault notifications
Skippi
Warning/fault
Battery deep discharge
Voltage too high (after full charge and
driving downhill)
More detailed information about the existing fault is shown on the LCD
monitor on the control panel (see section 8.2.1).
Faulty cabling or plug contacts;
Defective actuator
Overheating due to excessive load
Cause
Charge as soon as possible
Continue driving slowly
Check cabling / plug connection;
Contact specialist dealer
Cool down phase
Malfunctions/troubleshooting
Possible corrective action
Ottobock 81
|