Table of Contents
Advertisement
Placement of the personal restraint system integrated in the vehicle for transporting persons with
reduced mobility
1) Pull each end of the restraint lap belt from the inner side of the seat through to the outside (see fig. 74).
2) Engage the ends of the restraint lap belt on the mounting point/pin of the rear lashing straps on the left and
right sides respectively (see fig. 75).
3) Secure the shoulder harness on the mounting point/pin provided on the lap belt (not illustrated).
→ The restraint lap belt is pulled through and fastened.
→ The belt runs between the side panel and seat cushion on each side.
72
74
7.18.1.3 Restrictions for use
WARNING
Risk of accidents and injury due to using the product with certain settings and/or installed options
Severe injury in case of accidents due to options coming loose
► Before using the product as a seat in a vehicle for transporting persons with reduced mobility, remove options
that need to be taken off for safe transportation. Please observe the following table.
► Stow all dismantled components securely in the vehicle for transporting persons with reduced mobility.
► Please note that certain settings on the product exclude the use of the product in a vehicle for transporting
persons with reduced mobility.
Option
1)
Add-on drive
Crutch holder with tip-assist, right/left
(Avantgarde DS)
Crutch holder (Avantgarde DV)
Wheelbase extension
Avantgarde 4
73
75
Transportation in a
Remove option
vehicle for trans
porting persons
with reduced mobil
ity not possible
X
X
X
Use
Secure option on
product
39
Advertisement
Table of Contents
