Cleaning The Exterior Of The Equipment - Waters ACQUITY UPLC Overview And Maintenance Manual

Figure 3–115: Location of seal-wash tubing
Location of seal-wash tubing
Location of seal-wash tubing

3.20 Cleaning the exterior of the equipment

Warning:
• ensure that the electrical power to the equipment is interrupted;
• when cleaning the surface of the equipment, apply water to a cloth, and then wipe
the instrument or device. Do not spray or otherwise apply water directly onto any
equipment surface.
Warning:
process.
Requirement:
Requirement:
this procedure.
To clean the exterior of the equipment:
Clean surfaces of the equipment using only a clean, soft, lint-free paper or clean cloth dampened
with water.
To avoid electric shock,
To avoid personal injury, use eye and hand protection during the cleaning
Use eye protection when performing this procedure.
Wear clean, chemical-resistant, powder-free gloves when performing
August 8, 2016, 715005050 Rev. C
Page 125