Installing A Frame Link Module - HPE Synergy 12000 Frame Setup And Installation Manual

5. Install the compute module. Press the compute module handle near the release button to completely close the handle.

Installing a frame link module

Procedure
1. If installed, remove the frame link module blank from the frame link module bay in the rear of the frame.
CAUTION: Use caution when installing the frame link module into the frame to avoid damage to the connector.
Installing a frame link module with a damaged connector can result in damage to the midplane.
2. Open the frame link module latch.
3. Remove the frame link module end cap.
4. Install the frame link module into the frame.
5. Close the frame link module latch.
Installation 65