Device Bay Numbering - HPE Synergy 12000 Frame Setup And Installation Manual

Item
1
2
3

Device bay numbering

All device bays in the frame are numbered in consecutive order from lowest to highest, from left to right from top to
bottom, as observed by a user looking directly at the frame.
Devices larger than half-height (multi-bay devices) are numbered according to the lowest device bay number that the
multi-bay device occupies.
For an even number of device modules, they must be installed next to each other between sets of vertical partitions if all
device bays in the frame are to be used.
For an odd number of single-wide full-height device modules, an even number must be installed next to each other
between each vertical partition, and the odd module must be installed in device bay 2 if all device bays in the frame are to
be used.
The device bay numbering is available on the Information pull tabs.
Device bay type
Single-wide, full-height
Single-wide, half-height
Single-wide, mixed-height
Double-wide, full-height
Double-wide, half-height
Double-wide, mixed-height
Description
Device bays—Compute modules and storage modules.
Front panel—Provides access to the HPE Synergy Console, through KVM or laptop.
Appliance bays.
Device bay numbering
Component and LED identification 15