Troubleshooting; Symbols On Equipment; Error Screens When Connecting To The Hpe Synergy Console; Hpe Synergy Console Not Responding - HPE Synergy 12000 Frame Setup And Installation Manual

Troubleshooting

Symbols on equipment

The following symbols might be found on the equipment to indicate the presence of potentially hazardous conditions.
249.50 kg
550.00 lb

Error screens when connecting to the HPE Synergy Console

The following are some basic errors screens that may be encountered when connecting to the HPE Synergy Console.

HPE Synergy Console not responding

If the frame Composers are detected but not responding after 20 minutes, the following Attention screen appears, and
prompts a Reset.
98 Troubleshooting
This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all
servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure.
Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no user or field
serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is contacted,
the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before
touching.
This symbol indicates that the component exceeds the recommended weight for one individual to
handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment, observe local
occupational health and safety requirements and guidelines for manual material handling.
These symbols, on power supplies or systems, indicate that the equipment is supplied by multiple
sources of power.
WARNING: To reduce the risk of injury from electric shock, remove all power cords to disconnect
power from the system completely.