Configure Additional Settings - HPE Synergy 12000 Frame Setup And Installation Manual

For more information about configuring HPE Image Streamer, see the HPE OneView online help or the HPE OneView User
Guide on the Hewlett Packard Enterprise website (http://www.hpe.com/info/synergy-docs).
Configuring HPE OneView to deploy OS build artifacts to compute modules
Once you add an Image Streamer OS deployment server in HPE OneView, you can launch the Image Streamer graphical
user interface from the HPE OneView OS Deployment Servers screen.
Procedure
1. Upload artifacts from a bundle or create new artifacts.
From the Image Streamer interface, the software administrator can upload artifacts from a bundle for use in HPE
OneView or use the Image Streamer interface to create golden images and other OS build artifacts.
2. Create or configure a server profile.
Create and apply a server profile which includes an OS deployment selection and values for the server-specific settings
for the selected OS deployment.
3. Verify operating system deployment.
Review server profile screen details to view the operating system volume that has been created as a result of
deployment.
4. Power on the compute module.
Power on server to boot from deployed operating system.
For more information about using Image Streamer to create and deploy OS build artifacts, see the Image Streamer online
help or the HPE Image Streamer User Guide on the Hewlett Packard Enterprise website (http://www.hpe.com/info/
synergy-docs).

Configure additional settings

Once your HPE Synergy system is setup, configure additional settings. For detailed steps, see "Quick Start: Initial
configuration of HPE OneView" in the HPE OneView Help for HPE Synergy (http://www.hpe.com/support/OV-
InitialConfig).
Configuring HPE Synergy 97