Installing A Frame Link Module - HPE Synergy 12000 Frame Setup And Installation Manual

3. Once fully inserted, release the latches to lock in place.

Installing a frame link module

Procedure
1. If installed, remove the frame link module blank from the frame link module bay in the rear of the
frame.
CAUTION: Use caution when installing the frame link module into the frame to avoid damage to
the connector. Installing a frame link module with a damaged connector can result in damage to
the midplane.
2. Remove the frame link module end cap.
3. Insert the frame link module into the frame.
4. Close the frame link module latch.
42 Installing a frame link module